PING kommer med nye og lettspilte køller - den
Lanserer ny G-serie + Crossover
PING leverer godt golfutstyr. Nå har selskapet kommet med en ny G-serie.
Køllene er lettspilte. De blir presentert ulike varianter innenfor de ulike
kølletypene. Eksempelvis kommer det nå tre nye drivere i G-serien.
G Crossover er en kølle som er en mellomting mellom et jern og en hybridkølle.
Det kommer en ny treer-spoon som kan brukes som en alternativ driver og en sterk
Jernene går, i følge pressemeldingen både lengre og høyere, og ballene stopper
fortere på greenen.
Hybridene er også forbedret.
Detaljene kan du lese i pressemeldingen under inkludert priser i norske kroner:
PHOENIX (January 11,
2016) – With
a focus on providing maximum forgiveness with as much speed as possible, PING
today introduced the new G series – the company’s latest game-changing
innovations that will provide measurable performance gains without sacrificing
any important attributes.
The new G range includes three driver options -- standard, SF Tec
(Straight Flight Technology) and LS Tec (Low-Spin Technology) -- along with
three fairway woods (standard, SF Tec and Stretch), hybrids and irons. PING has
also announced the introduction of G Crossover, a new category of club designed
to provide the distance of a hybrid with the control and accuracy of an iron.
All new products can be pre-ordered beginning today at PING-authorised golf
shops around the world.
The most visible innovation on the G driver is the newly designed crown, which
Technology to enable mass to be redistributed low and back in the
clubhead for optimal CG placement, making it both the longest and most forgiving
PING driver ever. Inspired by the complex design of a dragonfly’s wings, the G
driver’s crown utilises external weight-saving support structures and is both
the lightest and thinnest that PING have ever manufactured.
Also new to the G series is the Stretch 3; a larger headed driving 3-wood
with a deeper, less-lofted face for golfers seeking a versatile driver
alternative or hotter-faced fairway wood. Featuring all the same technological
advancements that can be found in the regular G fairway woods (Carpenter 455
steel face, cascading sole design and a uniquely thin crown), the Stretch 3
provides increased ball speeds and less spin, leading to more distance and
accuracy. The new G range of fairway woods also includes an SF Tec version which
utilises a more heel-side centre of gravity in order to provide shot bend
The new G iron utilises the same revolutionary
COR-Eye™ Technology found in GMax, with a deep CG providing more dynamic
loft and a strategic approach to the distribution of weight in the heel, toe and
hosel locations to provide unmatched forgiveness. Golfers will be able to
benefit from increased distance with a higher max shot height and steeper
landing angle so that shots hit and hold greens. Upgraded aesthetics include the
contrast of a light satin blast finish and mirror polished back, as well as a
clean hosel-to-shaft transition through the use of a ferrule.
The new G series hybrids now also incorporate Turbulator Technology for
improved ball capture and inspiration at address, with additional improvements
including the use of Carpenter 455 steel in order to save weight in the face and
crown, as well as a rougher face for higher friction and reduced spin.
the use of Dragonfly Technology, a thinner crown enables weight to be
re-allocated within the head to move the CG even lower and deeper to maximise
the MOI for maximum forgiveness. As well as repositioned turbulators to further
delay air flow separation prior to impact, the new G driver also features Vortec
Technology which improves clubhead aerodynamics by minimising wake turbulence
for faster clubhead speed and stability.
- Lofts 9 °& 10.5° in standard and LS Tec heads, and 10° & 12°
in SF Tec head (adjustable +/- 0.6° or 1°)
- Std. Length 45.75”, D3, 206g (standard), D4, 207.5g (LS Tec), D1, 203g (SF
- Stock graphite shaft: PING Alta 55 (SR, R, S, X); Optional shafts (Std. length
45.25”): Tour 65 & Tour 80 (R, S, X)
- RRP 4399 NOK
G Fairway Woods
leading edge sits closer to the ground which raises the impact position on the
face to make getting the ball airborne easier. The properties of the Carpenter
455 steel face allow for a thinner, variable-thickness face, which increases
flexing at impact to deliver increased ball speeds and higher launch through
improved roll-radius consistency. A new cascading sole design engages more of
the structure at impact, resulting in a large springing effect for faster ball
speeds. Like with the driver, a thinner crown means discretionary weight has
been used to move the CG lower and further back, making it easier to get the
ball airborne and launch it higher.
- Lofts 3W (14.5°), 5W (17.5°) &
7W (20.5°) in standard head, 3W (16°) & 5W (19°) in SF Tec head and 3W (13°) in
- Stock graphite shaft: PING Alta 65 (SR, R, S, X); Optional shafts: Tour 65 &
Tour 80 (R, S, X)
- RRP 2799 NOK
Through a similar use of a cascading sole design and a Carpenter 455 steel face,
the G hybrids enable more face flexing for increased ball speeds. Combined with un-painted
grooves in the middle of the face, the addition of turbulators improves
alignment and inspires confidence by providing improved ball capture at address.
- Available 17°, 19°, 22°, 26°,
- Stock graphite shaft: PING Alta 70 (SR, R, S, X); Optional shafts: Tour 90 (R,
- RRP 2299 NOK
With its introduction defining an innovative new category, the G Crossover
provides golfers the distance of a hybrid with the control and accuracy of an
iron. An iron-style Carpenter 455 steel face coupled with a tiered internal sole
maximises both trajectory control and distance, while extreme
heel-toe weighting expands perimeter weighting
to provide hybrid-like forgiveness.
- Available 18°, 21°,
- Stock graphite shaft: PING Alta (SR, R, S, X); Optional shafts:
(R, S, X),
PING AWT 2.0 (R,
- RRP 2299 NOK
PING’s revolutionary COR-Eye™ Technology, the new G iron’s thinner face
facilitates more flexing which results in additional carry with a higher max
height for increased stopping power. The newly designed cavity structure houses
the concealed Custom Tuning Port that connects to the sole, enabling each iron’s
centre of gravity to be moved lower and further back for extreme forgiveness.
Also new in the G iron is the Ascending Weight Technology (AWT) 2.0 shaft which
provides improved distance and accuracy with long irons and more control with
short irons and wedges.
- Available 4-9,
PW, UW, SW, LW
- Stock steel shaft: PING AWT 2.0 (R, S, X)
- Stock graphite shaft: PING CFS Graphite (65 SR, 70 R, 80 S)
- RRP: 1160 NOK per club w/steel shaft; 1315 NOK per club w/graphite shaft
Her finner du
Her diskuterer du golf
Si din mening!!